The bunny’s ears rise almost to the waist bow, so the appliqué has to be positioned before the lower floral decorations are sewn down. This bunny crochet baby dress pattern uses an ivory sleeveless A-line dress as the structural base, then adds a dimensional white bunny, pink-lined ears, flowers, leaves, pearl-style accents and a large pink bow. Use soft DK cotton or baby yarn with a 3.5–4 mm hook and size the garment from the child’s measurements.
The Design: What Makes This Bunny Dress Different
The dress itself stays relatively simple: a firm upper bodice, shaped armholes and gradual increases through the lower body. That flat background is important because the decorative work carries considerable visual weight. The bunny is constructed separately from circular and oval crochet pieces rather than being worked directly into the dress.
The second structural decision is placement. The bunny sits low on the front, leaving enough clear space between its ears and the large waist bow. Pink flowers balance both sides of the rabbit, while small green leaves prevent the pink elements from merging visually. Finally, the wavy pink trim follows the lower front without replacing the structural ivory hem. A common mistake with an appliqué baby dress is attaching every decoration before blocking the garment; that can lock wrinkles permanently into the front panel.
Project Information at a Glance
| Skill Level | Construction | Yarn Weight | Hook | Main Features |
|---|---|---|---|---|
| Intermediate | Sleeveless A-line dress with sewn appliqués | DK / light #3 | 3.5–4 mm | Bunny, bow, flowers, leaves and wave trim |
Materials and Tools
Yarn
- Warm Ivory — DK/light #3 — main dress, bunny and ear borders
- Pink — DK/light #3 — bow, inner ears, cheeks, flowers and wave trim
- Green — DK/light #3 — leaves and flower stems
- Yellow — small amount — flower centers
- Black — small amount — embroidered nose and mouth
Tools
- 3.5–4 mm crochet hook
- Yarn needle
- Scissors
- Stitch markers
- Measuring tape
- Blocking mat and rustproof pins
- Optional sewn decorative beads for non-infant display garments only
Important Baby-Safety Modification
The photograph shows round pearl-like decorations and black dimensional eyes. For an actual baby garment, embroidered details are the safer construction choice. Replace loose pearl decorations with embroidered French knots or tightly crocheted bobbles, and embroider the bunny eyes instead of using detachable plastic components.
Any decoration added to infant clothing must be checked regularly for loose threads or damaged attachment points.
Abbreviations
- MR — magic ring
- ch — chain
- sc — single crochet
- hdc — half double crochet
- dc — double crochet
- tr — treble crochet
- inc — increase
- dec — decrease
- sl st — slip stitch
- st/sts — stitch/stitches
- BLO — back loop only
Sizing the Baby Dress
Measure the child rather than selecting the dress size from age alone. Record chest circumference, shoulder-to-hem length, shoulder width and armhole depth.
Add approximately 4–6 cm of positive ease to the chest measurement. The dress in the photograph has an A-line silhouette, so the hem should be substantially wider than the chest.
| Approximate Age | Target Garment Chest | Suggested Length |
|---|---|---|
| 0–3 months | 44–46 cm | 34–37 cm |
| 3–6 months | 46–49 cm | 37–40 cm |
| 6–12 months | 49–52 cm | 40–44 cm |
| 12–18 months | 52–55 cm | 44–48 cm |
| 18–24 months | 54–58 cm | 47–52 cm |
Treat these measurements as starting targets and compare them with the intended wearer before crocheting the full body.
Gauge
Make a minimum 12 × 12 cm swatch in the main body stitch. Wash and dry it before measuring the central 10 cm.
Record the number of stitches and rows per 10 cm.
Calculate the approximate body stitch count with:
desired garment circumference × stitches per cm = required stitches.
The bunny and flowers are decorative components, so correct dress dimensions should be established before their sizes are finalized.
Pattern — Main Dress
Construction Method
The dress can be worked from the neckline downward in joined rounds. Leave a small back opening if the neckline is too narrow to pass comfortably over the head.
Ivory Neckline
Yarn: Warm Ivory.
Make a foundation chain corresponding to the required neckline measurement.
Round 1: Ch 1, sc evenly around. Join with sl st.
Round 2: Ch 2, hdc around, distributing increases evenly.
Round 3: Hdc around with increases positioned between those from Round 2.
Round 4: Hdc around, adding only enough increases to keep the yoke flat.
Upper Yoke
Round 5: Ch 3, dc around with evenly distributed increases.
Round 6: Dc around, placing increases between previous increase points.
Round 7: Repeat as required for the selected size.
Round 8: Hdc around without increasing.
Continue until the yoke reaches the required underarm depth.
Divide the Armholes
Lay the yoke flat and mark the front, back and two sleeve sections.
Work across the back.
Chain approximately 4–7 cm for the first underarm, skip the sleeve section and continue across the front.
Make the second underarm chain, skip the remaining sleeve section and complete the round.
Try the yoke against the required measurements before continuing.
Upper Dress Body
Round 1: Ch 2, hdc around, working into every underarm chain.
Round 2: Hdc around.
Round 3: Work hdc, adding approximately 4 evenly spaced increases.
Round 4: Hdc around without increasing.
Repeat Rounds 3–4 until the body begins to form the required A-line shape.
A-Line Skirt
The lower dress in the photograph widens gradually rather than gathering suddenly at a waist seam.
Continue in hdc or sc-based texture.
Increase Round: Add 4–6 evenly spaced increases.
Plain Round: Work one stitch in every stitch.
Repeat these two rounds as required.
For a wider hem, shorten the distance between increase rounds near the lower third of the garment.
Place increases at changing positions from one increase round to the next. Stacking them vertically can create visible ridges.
Lower Ivory Hem
Stop increasing approximately 2–3 cm before the final edge.
Round 1: Sc around.
Round 2: Hdc around.
Round 3: Sc around.
This compact section stabilizes the bottom before the pink decorative wave is attached.
Neckline Edging
Join ivory yarn at the back neckline.
Work one round of sc evenly around.
Add a second round of reverse sc or compact slip-stitch edging if a firmer finish is wanted.
Do not add stitches unless the neckline is pulling inward.
Armhole Edging
Work one round of sc around each armhole.
Place approximately one stitch per stitch across horizontal sections and adjust the ratio along vertical edges.
If an armhole flares, remove several stitches at the underarm during the next round.
Large Pink Bow
The bow should be completed before the bunny is permanently attached because it determines how high the bunny ears can extend.
Bow Wing — Make Two
Yarn: Pink.
Ch 15.
Row 1: Sc in second ch from hook and across. (14)
Row 2: Ch 1, turn, inc, sc across to final st, inc. (16)
Rows 3–6: Sc across. (16)
Row 7: Dec at both ends. (14)
Row 8: Sc across. (14)
Fasten off, leaving a long sewing tail.
Bow Tails — Make Two
Ch 19.
Row 1: Sc in second ch and across. (18)
Rows 2–4: Ch 1, turn, sc across. (18)
For the pointed lower end, decrease at both ends over the final two rows or finish the end with a shallow V shape.
Bow Center
Ch 6.
Sc across for enough rows to wrap around the gathered bow center.
Place the two wings together, position the tails behind them and pinch all pieces firmly at the middle.
Wrap the center strip around the assembly and sew it closed on the back.
Attach the bow to the upper front of the dress through its center and inner portions of the wings.
Bunny Head Appliqué
Yarn: Warm Ivory.
The bunny face is a flat circular appliqué rather than a stuffed amigurumi head.
R1: 8 hdc in MR. (8)
R2: 2 hdc in each st around. (16)
R3: *Hdc, inc* around. (24)
R4: *Hdc in next 2 sts, inc* around. (32)
R5: *Hdc in next 3 sts, inc* around. (40)
R6: *Hdc in next 4 sts, inc* around. (48)
Add another increase round if a larger face is required.
Finish with one round of sc to define the edge.
Fasten off with a long sewing tail.
Pink Inner Ears — Make Two
Yarn: Pink.
Ch 15.
Beginning in the second chain from the hook, work:
2 sc, 3 hdc, 5 dc, 2 hdc, sc.
Place 4–5 stitches into the final chain to turn around the tip.
Work back along the opposite side using the corresponding stitch heights.
Join at the base.
The finished piece should form a long oval with a rounded upper tip.
Ivory Outer Ears — Make Two
Make an oval slightly larger than each pink inner ear.
Ch 17.
Work along the chain using progressively taller stitches toward the center, round the tip with several stitches, then mirror the sequence down the opposite side.
Finish with one round of sc.
Place a pink inner ear on each ivory outer ear and sew it down through the outer edge only.
Leave approximately 5–8 mm of ivory visible around the pink section.
Attach the Bunny Ears
Position the ears behind the bunny head before sewing the head to the dress.
The ears should angle slightly outward rather than standing parallel.
Sew the bottom 2–3 cm of each ear securely to the dress.
Leave the upper portion free if a dimensional appearance is desired.
Bunny Face
Embroider two black eyes symmetrically across the upper half of the face.
Use black yarn to create a small triangular nose.
Bring one short line downward from the nose, then embroider two curved mouth lines.
Keep all knots and yarn tails secured on the back of the appliqué before it is attached to the dress.
Pink Bunny Cheeks — Make Two
Yarn: Pink.
R1: 6 sc in MR. (6)
R2: Inc ×6. (12)
Fasten off.
Sew one cheek to each side of the mouth.
Bunny Front Paws — Make Two
Yarn: Warm Ivory.
R1: 6 sc in MR. (6)
R2: Inc ×6. (12)
R3: *Sc, inc* ×6. (18)
R4: Sc around. (18)
Fasten off with a long tail.
Fold the lower portion slightly to create a compact oval paw.
Sew both paws below the bunny head with their upper edges tucked partially beneath it.
Pink Flowers — Make Three or More
Yarn: Pink.
R1: 5 sc in MR. Join. (5)
R2: Work one petal into each stitch:
(sl st, ch 2, 3 dc, ch 2, sl st)
Repeat five times.
Fasten off.
Yellow Flower Centers
Yarn: Yellow.
Work 6 sc into MR and fasten off.
Sew one small yellow center over the middle of each pink flower.
For baby clothing, a crocheted center is preferable to a detachable button.
Green Leaves
Yarn: Green.
Ch 8.
Starting in the second chain:
sc, hdc, dc, 2 tr, dc, hdc.
Work 3 sc into the final chain.
Continue along the opposite side:
hdc, dc, 2 tr, dc, hdc, sc.
Join and fasten off.
Surface crochet a short line through the center if a stronger leaf vein is wanted.
Make approximately 4–6 leaves depending on the number of flowers.
Green Flower Stems
Use surface slip stitches directly on the blocked dress or crochet narrow chains separately.
Keep the stems short. Long loose stems can catch on surrounding objects.
Position each stem before sewing its flower and leaves into place.
Pink Wave Trim
The photograph shows a raised pink wave running horizontally near the lower hem.
Make a chain long enough to span the dress front plus a small amount for shaping.
Row 1: Sc across.
Row 2: Work repeated shallow curves by alternating groups of hdc, dc and hdc with compact sc sections.
Another method is to crochet a long cord and pin it into regular waves before sewing.
For the closest control over the photographed shape, use the cord method.
Pin the wave so each peak and valley is approximately the same width. Sew through the back loops of the cord with matching pink yarn.
Decorative White Dots
Instead of loose pearl beads, crochet small white bobbles or embroider raised knots.
Small Crochet Dot
R1: 6 sc in MR. (6)
Pull the ring tightly closed.
Fasten off with a long tail.
Sew the small circle flat to the dress.
Distribute the dots asymmetrically but maintain roughly equal visual weight on the left and right sides of the garment.
Appliqué Placement
Block the ivory dress first and lay it completely flat.
Place the bow at the upper center.
Position the bunny head in the lower half with enough room for the ears to extend upward without touching the bow.
Place the two paws below the head.
Arrange one larger flower group on the lower left and another on the lower right.
Add the green leaves and stems.
Pin the pink wave approximately 2–4 cm above the structural hem.
Only after all major pieces are balanced should sewing begin.
How to Sew the Bunny Flat
Thread the long ivory tail through a yarn needle.
Sew around the outermost round of the bunny head using small stitches approximately 5–8 mm apart.
Do not pull tightly enough to gather the dress fabric.
After completing the perimeter, add several hidden anchoring stitches through the central area of the head. This prevents a large appliqué from lifting away from the dress during washing.
Adjusting the Dress Length
Length should be added before the final hem.
For a longer dress, continue the A-line body while maintaining the established increase frequency.
For a tunic version, stop the body earlier and work the hem immediately.
Reposition the bunny vertically after changing the dress length. It should remain visually connected to the lower decorative area rather than floating near the waist.
Adjusting the Bunny Size
For a smaller bunny, stop the head after R5.
For a larger appliqué, continue the standard circular increase sequence:
Next round: *Hdc in next 5 sts, inc* around.
Continue adding one additional plain stitch between increases on each subsequent increase round.
Make the ears and paws proportionally larger when the head diameter changes.
Yarn Planning
Because garment size and yarn construction vary, calculate yarn from a washed swatch rather than treating a photograph as a quantity reference.
The ivory yarn will account for most of the project. Pink is the second-largest quantity because it is used for the bow, ear centers, flowers, cheeks and wave trim. Green and yellow require much smaller amounts.
Keep additional ivory yarn available until all neckline, armhole and hem finishing has been completed.
Assembly
- Complete the ivory dress to the required chest, armhole and finished-length measurements, then weave in the structural yarn tails.
- Block the dress flat and verify that both side edges, armholes and shoulder sections are symmetrical.
- Make the large pink bow and pin it at the upper center without permanently attaching it yet.
- Crochet the bunny head, pink inner ears, ivory outer ears, cheeks and two front paws.
- Arrange the bunny below the bow, sew the ears first, then secure the head and paws without gathering the dress fabric.
- Embroider the eyes, nose and mouth, then attach the two pink cheeks securely.
- Make the pink flowers, yellow centers and green leaves, arrange them around the lower bunny and sew every piece independently.
- Pin the pink cord into an even wave approximately 2–4 cm above the hem and sew it through small hidden stitches.
- Replace the photographed pearl-style decorations with securely embroidered knots or flat crocheted dots when the garment is intended for a baby.
- Sew the bow firmly into position, weave in every remaining tail and inspect all appliqués before the garment is worn.
The completed piece is an ivory A-line baby dress with a dimensional bunny scene, pink floral details and a structured bow.
7 Technical Tips
- The dress twists toward one side: increases are probably being stacked in the same positions. Move every increase point by at least 2–3 stitches on the following increase round.
- The armholes flare outward: too many edging stitches were added. Remove approximately one stitch for every 5–7 edge stitches until the armhole lies against the garment.
- The bunny head forms a cup: the circular increase rate is too low for the yarn and hook combination. Block the circle after R4 and add increases before continuing if its outer edge lifts from the surface.
- The ears collapse over the bunny face: their bases are not anchored deeply enough. Sew the lower 2–3 cm of each ear to the dress and add one hidden stitch approximately 3 cm above the base.
- The bow pulls the bodice downward: the center is carrying the full weight. Add hidden attachment stitches 2–3 cm into each wing while keeping the outer edges free.
- The appliqué puckers the dress: sewing tension is too tight. Leave each attachment stitch just firm enough to hold the appliqué flat without shortening the underlying fabric.
- The pink wave becomes irregular: it was sewn without measuring the repeat. Pin every peak at equal intervals of approximately 4–6 cm before attaching the cord.
Color Variations
The same construction works with several palettes. Ivory with dusty rose produces a muted version, while white with lavender changes the floral theme without altering the pattern. Sage leaves can replace the bright green for a softer contrast.
A monochrome version can also be made by crocheting the entire dress and bunny in cream, then using only the bow and flower centers for accent color.
Care and Blocking
Follow the yarn label for washing temperature and drying method. Before washing, inspect every flower, leaf, ear and bow attachment.
After washing, reshape the dress flat. Straighten the neckline and armholes first, then arrange the hem to its intended A-line width.
Shape the bunny ears and bow while damp. Avoid pressing dimensional appliqués directly with a hot iron because pressure can flatten the raised crochet structure.
Conclusion
This bunny crochet baby dress pattern works best when the garment and decoration are treated as separate stages. First establish the correct chest, armhole depth and A-line length. Block the ivory dress, then arrange the bow, bunny, flowers and pink wave on the finished surface before sewing anything permanently. For a baby version, replace the photographed pearl-style pieces and detachable eyes with embroidered or securely crocheted details. Photograph the finished front while it lies flat before wearing, then share the project on Pinterest or Instagram with #BunnyCrochetBabyDress. For your version, would you keep the bunny white and pink or change the ear centers and flowers to lavender?