Introduction
A two-leaf sprout cannot stay upright on a kitten hood unless the stem has a reinforced base. This sprout hood kitten amigurumi pattern uses a short stuffed stem, flattened leaves and four crown anchor points. Super-bulky chenille, a 4.5 mm hook and 18 mm eyes produce an approximately 28 cm intermediate project. Separate clothing keeps the mint sections out of the cream body rounds.
The Design: What Makes This Sprout Kitten Different
The head reaches 42 stitches while the body stops at 36, creating the oversized face and compact torso shown in the reference image. Rounded ears remain outside the hood and use contrasting inner circles, so the cat silhouette stays readable beside the plant accessory. The crown sprout is built from a narrow stem and two unstuffed leaves. That arrangement lowers its weight and limits backward pull on the hood. Cream edging around the face, cuffs and hem connects the garment visually to the kitten without introducing mid-round color changes. A common failure in a chenille kitten amigurumi is attaching the stem through only one hood stitch. The crown then stretches into a visible hole. This plant sprout cat crochet pattern distributes the load across four stitches and anchors the stem to the stuffed head beneath the hood.
Project Info at a Glance
| Skill Level | Time | Finished Size | Hook | Best For |
|---|---|---|---|---|
| Intermediate | 10–13 hours | Approximately 28 cm | 4.5 mm | Display or supervised play |
The finished measurement is an estimate for super-bulky chenille. Yarn diameter, gauge and stuffing pressure can change the result.
Materials and Tools
Yarn
- Cream white — bulky or super-bulky chenille — approximately 140 g — Himalaya Dolphin Baby, Premier Parfait Chunky or a comparable plush yarn.
- Mint green — bulky or super-bulky chenille — approximately 120 g — use the same yarn line as the cream shade.
- Leaf green — bulky chenille — approximately 20 g for the stem and two leaves.
- Pale pink — chenille scraps — approximately 15 g for the cheeks and paw pads.
- Pink embroidery yarn — DK or worsted — less than 2 g for the nose and mouth.
- Brown embroidery thread — approximately 1 m for the whiskers.
- Strong sewing yarn — cream, mint and green — for structural attachments.
Tools
- 4.5 mm crochet hook
- Two 18 mm black safety eyes
- Polyester stuffing, approximately 120–140 g
- Large-eye yarn needle
- Embroidery needle
- Locking stitch markers
- Dressmaker pins
- Scissors
Replace plastic eyes with embroidered features when the figure is intended for a child younger than three or for an animal.
Abbreviations
MR — magic ring; sc — single crochet; inc — two single crochets in one stitch; dec — decrease; sl st — slip stitch; ch — chain; BLO — back loop only; FLO — front loop only; hdc — half double crochet; dc — double crochet; st/sts — stitch/stitches.
An invisible decrease is worked through the front loops of the next two stitches before completing one single crochet.
Pattern — Step by Step
Work in a continuous spiral unless a section is marked as joined or turned. Move the marker into the first stitch after every completed round.
Kitten Head
Yarn: cream white — standard six-stitch amigurumi math.
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (1 sc, inc) ×6 (18)
R4: (2 sc, inc) ×6 (24)
R5: (3 sc, inc) ×6 (30)
R6: (4 sc, inc) ×6 (36)
R7: (5 sc, inc) ×6 (42)
R8–R14: sc around (42)
R15: (5 sc, dec) ×6 (36)
R16: (4 sc, dec) ×6 (30)
R17: (3 sc, dec) ×6 (24)
Insert the 18 mm eyes between R11 and R12. Leave eight visible stitches between their inner edges.
R18: (2 sc, dec) ×6 (18)
R19: (1 sc, dec) ×6 (12)
R20: dec ×6 (6)
Pack stuffing around the eye posts before filling the crown. Keep the lower front slightly softer for the muzzle.
Fasten off. Leave a 20 cm tail and close the final six front loops.
Muzzle
Yarn: cream white.
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (1 sc, inc) ×6 (18)
R4: sc around (18)
Add a thin layer of stuffing. The finished muzzle should project approximately 2 cm.
Fasten off. Leave a 30 cm sewing tail.
Body
Yarn: cream white — 36-stitch medium plateau.
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (1 sc, inc) ×6 (18)
R4: (2 sc, inc) ×6 (24)
R5: (3 sc, inc) ×6 (30)
R6: (4 sc, inc) ×6 (36)
R7–R11: sc around (36)
R12: (4 sc, dec) ×6 (30)
R13: sc around (30)
R14: (3 sc, dec) ×6 (24)
R15: sc around (24)
R16: (2 sc, dec) ×6 (18)
R17: sc around (18)
R18: (1 sc, dec) ×6 (12)
Stuff the belly evenly. Add denser filling to the upper 2 cm so the head does not tilt forward.
Fasten off. Leave a 40 cm attachment tail.
Arms or Front Legs — Make 2
Yarn: cream white.
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3–R5: sc around (12)
R6: (1 sc, dec) ×4 (8)
R7–R10: sc around (8)
Stuff R1–R5 only. Leave the upper section flat enough to fit inside a sleeve.
Flatten the opening and work 4 sc through both layers. Fasten off with a 25 cm tail.
Back Legs — Make 2
Yarn: cream white.
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (1 sc, inc) ×6 (18)
R4: (2 sc, inc) ×6 (24)
R5–R7: sc around (24)
R8: (2 sc, dec) ×6 (18)
R9: sc around (18)
R10: (1 sc, dec) ×6 (12)
R11: dec ×6 (6)
Pack the toe area firmly and leave the rear surface slightly flatter for sewing.
Fasten off. Close the opening and leave a 35 cm tail.
Outer Ears — Make 2
Yarn: cream white — flat circular construction.
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (1 sc, inc) ×6 (18)
R4: (2 sc, inc) ×6 (24)
Fasten off. Leave a 30 cm attachment tail on each circle.
Inner Ears — Make 2
Yarn: mint green.
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (1 sc, inc) ×6 (18)
Center each mint circle on one cream circle and sew around R3. Keep the final cream round visible as a border.
Fold the lower quarter inward and secure it with three stitches. Retain the cream tails for attachment.
Mint Hood
Yarn: mint green — fitted to a completed 42-stitch head.
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (1 sc, inc) ×6 (18)
R4: (2 sc, inc) ×6 (24)
R5: (3 sc, inc) ×6 (30)
R6: (4 sc, inc) ×6 (36)
R7: (5 sc, inc) ×6 (42)
R8–R12: sc around (42)
Stop the spiral. Work the next section in turned rows to create the face opening.
Row 13: ch 1, turn, sc in next 34 sts (34)
Row 14: ch 1, turn, sc across (34)
Row 15: ch 1, turn, dec, 30 sc, dec (32)
Row 16: ch 1, turn, sc across (32)
Row 17: ch 1, turn, dec, 28 sc, dec (30)
Row 18: ch 1, turn, sc across (30)
Fit the hood over the stuffed head. The opening should clear each eye by at least one stitch and sit beneath the cheek patches.
Join cream yarn at one lower corner. Work one round of sc around the opening, placing two sc in each lower corner. Join with sl st and work a second cream edging round in BLO. Fasten off.
Sprout Stem
Yarn: leaf green.
R1: 6 sc in MR (6)
R2–R6: sc around (6)
R7: inc ×6 (12)
Insert a narrow column of stuffing through R1–R5. Leave R7 flat to form the attachment base.
Fasten off. Leave a 30 cm sewing tail.
Sprout Leaves — Make 2
Yarn: leaf green.
R1: 6 sc in MR (6)
R2: (1 sc, inc) ×3 (9)
R3: (2 sc, inc) ×3 (12)
R4–R5: sc around (12)
R6: (2 sc, dec) ×3 (9)
Do not stuff. Flatten each leaf and pinch the final opening into a narrow base.
Work 4 sc through both layers. Fasten off with a 20 cm tail.
Mint Dress
Yarn: mint green — worked from the neckline down.
R1: ch 24, join without twisting, sc around (24)
R2: (3 sc, inc) ×6 (30)
R3: (4 sc, inc) ×6 (36)
R4–R6: sc around (36)
R7: work in FLO, (5 sc, inc) ×6 (42)
R8: (6 sc, inc) ×6 (48)
R9–R11: hdc around (48)
R12: change to cream, sc around (48)
Test the dress on the body. The cream hem should stop above the foot pads.
Fasten off and weave the tail into the garment interior.
Short Sleeves — Make 2
Yarn: mint green with cream cuffs.
R1: ch 12 with mint, join without twisting, sc around (12)
R2: (1 sc, inc) ×6 (18)
R3–R4: sc around (18)
R5: change to cream, (1 sc, dec) ×6 (12)
R6: sc around (12)
Place each sleeve over an arm before attaching the arm to the body.
Fasten off. Leave a 20 cm tail for tacking the shoulder edge to the dress.
Cheek Patches — Make 2
Yarn: pale pink.
R1: 6 sc in MR (6)
R2: inc ×6 (12)
Fasten off. Leave a 20 cm sewing tail and flatten each circle.
Large Paw Pads — Make 2
Yarn: pale pink.
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (1 sc, inc) ×6 (18)
Fasten off. Leave a 20 cm tail.
Toe Pads — Make 8
Yarn: pale pink.
R1: 6 sc in MR (6)
Fasten off. Leave a 12 cm tail on each toe pad.
Neck Bow
Yarn: mint green.
Row 1: ch 9, sc in second ch from hook and across (8)
Row 2: ch 1, turn, sc across (8)
Row 3: ch 1, turn, sc across (8)
Row 4: ch 1, turn, sc across (8)
Fasten off. Wrap a separate 22 cm strand around the center five times and knot it at the back.
Hood Drawstrings — Make 2
Yarn: mint green.
Ch 30. Starting in the second chain from the hook, sl st through all 29 chains.
Fasten off. Leave a 10 cm tail at both ends.
Drawstring Pompoms — Make 2
Yarn: mint green.
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: sc around (12)
R4: dec ×6 (6)
Add a pea-sized amount of stuffing before closing the final round.
Fasten off. Pull one cord end through each pompom and knot it inside.
Assembly
- Center the body beneath the head and sew through all 12 neck stitches twice. Align the face with the midpoint between the legs.
- Pin the muzzle across head R12–R16. Add small pieces of stuffing while closing the seam, then embroider a pink triangular nose and two short mouth lines.
- Sew the cheek patches beneath the outer eye corners. Add three brown whiskers on each side, keeping every visible strand between 2.5 and 3 cm long.
- Attach the layered ears between head R3 and R7. Leave approximately 12 stitches between their inner attachment points.
- Pull the dress over the body and anchor its neckline to body R16 with six hidden stitches. Keep the cream hem level around the torso.
- Place each arm inside a sleeve and attach it below the head. Tack each shoulder edge to the dress with two stitches.
- Sew the legs to the lower front of the body with three stitches between their inner edges. Check both foot bases against a level surface.
- Center one large paw pad on each foot. Arrange four toe pads in a shallow arc above it and pin all ten pieces before sewing.
- Fit the hood around the ears and face. Attach the stem base through four hood stitches and into the stuffed head, then sew one leaf to each side of the stem.
- Tack the hood to the back of the head at four points. Attach the drawstrings at the lower corners and cover their upper ends with the bow.
The assembled kitten should measure approximately 28 cm from the foot base to the upper leaf tips.
7 Technical Tips
- Stem collapse: An unfilled six-stitch tube bends under the leaf weight. Insert a narrow stuffing column through the first five stem rounds without stretching the stitches.
- Crown hole formation: Sewing the sprout through one stitch concentrates the load in a single loop. Spread the stem base across four hood stitches and catch the head fabric beneath it.
- Marker drift: Chenille can hide the first stitch and rotate the face center. Lock the marker through both loops after every completed round.
- Visible decrease gaps: Standard decreases can expose stuffing around the lower head. Work every head and body decrease through the front loops only.
- Late eye placement: The 18 mm washers cannot pass through the final six-stitch opening. Install both eyes after R17 and compare their height before continuing.
- Uneven paw pads: Completing one foot before marking the second can create different toe spacing. Pin all ten pads before sewing the first piece.
- Escaping chenille tails: Plush-yarn ends shorter than 15 cm may slide back through the fabric. Leave at least 20 cm on structural parts and weave each tail in three directions.
Conclusion
Test the crown attachment before hiding the final green yarn tail. The stem should remain vertical when the kitten is lifted, while both leaves angle outward without pulling the hood backward. Photograph the figure from the front and both sides, then correct any difference in ear height, foot position or leaf angle. Record the yarn brand, 4.5 mm hook and finished measurement because chenille diameter can change the scale by several centimetres. Share the completed sprout hood kitten amigurumi pattern project on Pinterest and post the crown assembly on Instagram with #SproutHoodKitten. Did a lightly stuffed stem or an unstuffed stem hold the two leaves more accurately?
