A bunny with no visible arms or legs has one structural problem: the ears must do all the character work. This bunny amigurumi crochet pattern gives you verified size, hook baseline, yarn style, and a full round-by-round build for the minimal plush shown here. You get the body, face details, and two upright ears. The advantage is speed. The same body can produce multiple color versions with almost no redesign.
The Design: What Makes This Bunny Different
This is not a standard rabbit plush with a round head, separate limbs, and a larger torso. The whole design depends on compression. The body is one pear-shaped form. That choice removes seam clutter and makes the chenille surface look cleaner. A more complicated bunny can tolerate extra joins. This one cannot. Every added seam would interrupt the soft, egg-like outline that gives the toy its identity.
The second critical choice is ear scale. The ears are long enough to shift the silhouette upward and instantly read as rabbit, even from several feet away. Shorter ears would make the plush look like a generic blob with a nose. One common mistake in a plush bunny amigurumi is overstuffing the lower body. Then the base rounds outward too aggressively, and the bunny starts looking like a weighted pear instead of a compact desk plush. Here, the lower section stays firm but not hard, while the ear bases are sewn close together to create the upright paired look visible in the photo.
Project Information at a Glance
| Skill Level | Time | Finished Size | Hook | Best For |
|---|---|---|---|---|
| Beginner to advanced beginner | 1–1.5 hours | 18–20 cm including ears | 4.5 mm | Desk decor, Easter gifts, market stock |
Materials and Tools
Yarn
- Plush chenille yarn — chunky / velvet style — about 80g — white, lavender, or another pastel main color
- Pink yarn — scrap amount — for the embroidered nose
- Black yarn — scrap amount — optional for tiny mouth detail if desired
Tools
- 4.5 mm crochet hook
- 10–12 mm safety eyes
- Fiberfill stuffing
- Yarn needle
- Stitch markers
- Pins
- Small scissors
Crochet Abbreviations
MR / sc / inc / dec / sl st / ch / BLO / FLO
Use invisible decrease on the closing rounds only; plush yarn opens visibly under standard decreases and breaks the clean egg-shaped profile.
Step-by-Step Plush Bunny Crochet Pattern
Work in continuous spiral rounds unless noted.
Body (Make 1)
Yarn: main color
Source: Standard amigurumi math
R1: 6 sc in MR (6)
R2: inc x6 (12)
R3: (sc, inc) x6 (18)
R4: (2 sc, inc) x6 (24)
R5: (3 sc, inc) x6 (30)
R6: (4 sc, inc) x6 (36)
R7: sc around (36)
R8: sc around (36)
R9: sc around (36)
R10: sc around (36)
R11: sc around (36)
Insert 10–12 mm safety eyes between R8 and R9, about 7 stitches apart.
R12: (4 sc, dec) x6 (30)
R13: (3 sc, dec) x6 (24)
R14: (2 sc, dec) x6 (18)
R15: sc around (18)
R16: sc around (18)
Stuff firmly, shaping the lower half slightly broader than the top.
R17: (2 sc, inc) x6 (24)
R18: sc around (24)
R19: (2 sc, dec) x6 (18)
R20: (sc, dec) x6 (12)
R21: dec x6 (6)
Fasten off. Leave a 20 cm tail.
Ears (Make 2)
Yarn: main color
Source: Standard amigurumi math
R1: 6 sc in MR (6)
R2: (sc, inc) x3 (9)
R3: sc around (9)
R4: sc around (9)
R5: sc around (9)
R6: sc around (9)
R7: sc around (9)
R8: sc around (9)
R9: sc around (9)
R10: sc around (9)
R11: sc around (9)
R12: sc around (9)
R13: sc around (9)
R14: sc around (9)
Stuff very lightly in the lower third only, or leave unstuffed for a softer ear curve.
Fasten off. Leave a 25 cm tail.
Nose Detail (Make 1)
Yarn: pink
Source: Standard amigurumi math
Embroider a small triangular nose centered one round below the eye line.
Optional: add one short vertical stitch below the triangle for a minimal mouth.
Keep the nose under 1 cm tall so it does not dominate the tiny face.
Assembly Instructions
- Shape the stuffed body with your hands so the base sits flat and the upper half stays rounded.
- Pin the ears close together at the crown rather than spreading them wide apart.
- Sew the first ear securely to the top center of the body.
- Attach the second ear immediately beside the first so both ears rise from one compact crown point.
- Angle the ears slightly outward at the top while keeping the bases nearly touching.
- Insert or confirm the safety eyes before tightening the final ear stitches.
- Embroider the pink triangular nose centered below the eyes.
- Add an optional short black mouth stitch only if you want a softer expression.
- Check the bunny from the front and side to confirm the ears remain balanced.
- Weave all tails through at least 4 cm of stuffing path inside the body.
The plush bunny is complete.
7 Technical Tips for Cleaner Amigurumi
- Mark the 36-stitch plateau immediately. Missing one increase before R6 leaves a lopsided body that becomes obvious once both ears are attached.
- Stuff the lower half more firmly than the top. If the entire bunny is packed equally, the body loses its stable egg profile and can wobble on a shelf.
- Do not overstuff the ears. Fully packed ears become thick cylinders and lose the soft ballooned look visible in the photo.
- Place the eyes before the last shaping rounds tighten. Forcing 10–12 mm posts through a nearly closed chenille face can split stitches around the eye line.
- Keep the ear bases close together. A gap wider than about 1 cm between ear bases weakens the rabbit silhouette from the front.
- Embroider the nose after both ears are sewn on. Ear placement slightly changes the face balance, so adding the nose too early can leave it looking off-center.
- Bury chenille tails deeper than usual. Tails shorter than 4 cm can slip loose first at the ear joins because that area gets handled every time the bunny is picked up.
Conclusion
This bunny amigurumi crochet pattern works because the construction stays disciplined: one compact body, two long ears, and almost no extra detail. Use the 4.5 mm hook baseline, plush chenille yarn, and roughly 18 to 20 cm finished height as your guide, then adjust stuffing density rather than rewriting the stitch counts. Post the finished bunny on Pinterest and Instagram with #PlushBunnyAmigurumi so the ear height and clean silhouette show clearly. Final choice: are you making the next bunny in lavender again, or turning the pair into a full pastel lineup?
