A six-petal flower creates the repeating structure of this gray and white crochet flower blanket pattern. Each flower has a small open center, raised petals, and a rounded outer edge. The individual motifs are joined to form a flexible floral bedspread with a decorative scalloped finish. This intermediate-level project uses DK or worsted-weight yarn, a crochet hook, and basic joining techniques.
The Design: What Makes This Crochet Flower Blanket Different?
The defining feature of this blanket is its repeated six-petal flower motif. Instead of crocheting traditional granny squares, you work separate flowers and connect them at selected petal tips. The result is an open floral fabric without a solid square background.
Two contrasting yarn colors create the checkerboard-style arrangement. Medium gray flowers alternate with off-white flowers, making the individual petals visible across the entire blanket.
The petals are formed with groups of elongated stitches worked into a common space. This creates a raised texture while maintaining the flexibility needed for a bed covering.
One common mistake when making a six-petal crochet flower blanket is joining motifs too tightly. Tight joins distort the petal shapes and pull the blanket out of alignment. Small connecting chains or slip stitches help preserve the spaces between flowers.
Pattern note: The instructions below are an original approximation of the photographed design, not a verified reproduction of the original maker’s pattern. The exact stitch construction cannot be determined from the photograph alone.
Project Information at a Glance
| Project Detail | Information |
|---|---|
| Skill Level | Intermediate |
| Construction | Individual six-petal motifs |
| Yarn Weight | DK or light worsted |
| Suggested Hook | 4.0 mm |
| Colors | Gray and off-white |
| Motif Size | Approximately 9–11 cm, depending on gauge |
| Estimated Time | Varies with blanket size and motif count |
| Finished Size | Customizable |
Materials and Tools
Yarn
- Medium gray DK yarn – approximately half the total yarn requirement.
- Off-white DK yarn – approximately half the total yarn requirement.
- Optional matching yarn – for reinforcing joins or finishing the edge.
Choose yarns with similar fiber content, thickness, and elasticity. Mixing significantly different yarn weights can cause uneven flowers and irregular edges.
For a large bedspread, the exact yarn requirement must be calculated from a finished sample motif. Weigh one gray flower and one white flower, then multiply each weight by the planned number of motifs in that color. Add approximately 10–15% for joins, finishing, and variation.
Tools
- 4.0 mm crochet hook, adjusted to achieve a firm but flexible fabric.
- Scissors for trimming yarn ends.
- Yarn needle for weaving in ends.
- Stitch markers for identifying joining points.
- Measuring tape for checking motif dimensions.
- Blocking pins and mats for shaping finished motifs.
Crochet Abbreviations
| Abbreviation | Meaning |
|---|---|
| MR | Magic ring |
| ch | Chain |
| sc | Single crochet |
| hdc | Half double crochet |
| dc | Double crochet |
| tr | Treble crochet |
| sl st | Slip stitch |
| st | Stitch |
| sp | Space |
| rep | Repeat |
This pattern uses US crochet terminology. The motifs are worked in joined rounds rather than continuous amigurumi spirals.
How to Crochet the Six-Petal Flower Motif
Each flower is made separately. The construction starts with a central ring, followed by six chain spaces and a round of rounded petals.
Step 1: Make the Flower Center
Yarn: Gray or off-white.
Round 1: Make a magic ring. Ch 1, work 6 sc into the ring, then join with a sl st to the first sc. (6 sc)
Pull the magic ring gently until the opening measures approximately 4–6 mm. The small central hole is part of the flower design.
Do not close the ring completely if you want to retain the visible open center shown in the photograph.
Step 2: Create Six Petal Spaces
Round 2: Ch 4, sl st into the next sc. Repeat the sequence around the center until six chain-4 loops have been formed. Join at the starting point. (6 chain-4 spaces)
Check that the six loops are approximately equal in size. These loops form the foundations of the petals.
Step 3: Crochet the Rounded Petals
Round 3: Work the following stitches into the first chain-4 space:
- 1 sc
- 1 hdc
- 3 dc
- 1 hdc
- 1 sc
Repeat this seven-stitch sequence in each of the remaining five chain spaces. Join with a sl st to the first sc. (6 petals, 42 stitches total)
The three double crochets form the widest section of each petal. The half double crochets and single crochets taper the sides.
Fasten off, leaving a yarn tail approximately 15 cm long for sewing or joining.
Important: This is a simplified, flat six-petal motif. The raised, ribbed petals in the photograph may require a different stitch technique. Make and evaluate a sample before committing yarn to a full blanket.
How to Make the Flowers More Textured
The blanket in the reference image has prominent vertical ridges running from the center toward the outer edge of each petal. These ridges resemble the effect of elongated stitches or grouped puff stitches.
For a fuller alternative, replace the three central double crochets of each petal with three treble crochets. This produces taller petals, although the resulting motif will not necessarily match the photograph exactly.
Another option is to work front-post stitches in a separately developed petal construction. Front-post stitches create visible raised lines but require additional rounds and a different stitch count.
Do not substitute complex stitches across every flower without first testing the motif’s finished width, height, and joining points.
Planning the Gray and White Flower Arrangement
Before joining the flowers, arrange them on a flat surface. Alternate gray and off-white motifs to create the repeating two-color pattern.
For a balanced layout, place a gray flower next to an off-white flower wherever the chosen joining geometry permits. A staggered arrangement can resemble the photographed blanket more closely than a simple rectangular grid.
The precise arrangement depends on the finished motif shape and the location of its joining points. Six-petal motifs naturally support hexagonal layouts, so adjacent rows may need to be offset.
Example Motif Counts
| Layout | Total Flowers |
|---|---|
| 8 rows × 10 flowers | 80 |
| 10 rows × 12 flowers | 120 |
| 12 rows × 15 flowers | 180 |
| 15 rows × 18 flowers | 270 |
These are planning quantities, not verified bed-size conversions. In a staggered layout, the number of motifs per row and the finished dimensions will depend on overlap, spacing, and joining geometry.
How to Join Crochet Flower Motifs
Method 1: Sewing the Flowers Together
Sewing completed motifs is a practical way to control the spacing and alignment.
- Block all flowers to approximately the same dimensions.
- Lay out the motifs in the selected color arrangement.
- Position neighboring flowers so that two petal tips meet.
- Thread a yarn needle with matching yarn.
- Pass the needle through the edge stitches of both petal tips.
- Make two or three small stitches at the connection point.
- Secure the yarn on the wrong side.
- Repeat at the planned contact points between neighboring motifs.
- Check the fabric frequently for pulling or gaps.
- Weave in all joining ends after completing each section.
Joining only at selected petal tips preserves the openwork spaces. However, the number and placement of joins must be tested on a small group of flowers to create a stable blanket.
Method 2: Join-As-You-Go Crochet
A join-as-you-go method connects flowers while crocheting their final petal round. It reduces the amount of sewing required after all motifs are complete.
When working a petal that touches an existing flower, replace an appropriate chain connection with a slip stitch into the neighboring motif. Continue crocheting the petal after making the join.
The exact joining stitch depends on the motif structure. Because the simplified flower above does not include a chain at every petal tip, it needs a tested joining modification before this method can be used consistently.
For that reason, the sewn method is the primary joining technique for this version of the pattern.
How to Calculate the Finished Blanket Size
Make at least six sample flowers and join them into a small section before calculating the final number required.
Measure the width and height of the joined sample. Divide those measurements by the number of motif intervals in each direction to estimate the average repeat dimensions.
For example, if a joined sample spans 45 cm across five repeating intervals, the average horizontal repeat is 9 cm.
A blanket with a target width of 180 cm would require approximately 20 horizontal repeats at that gauge.
This calculation is only an estimate. Staggered rows, scalloped edges, and blocking can change the final measurements.
Always measure the actual joined fabric rather than multiplying the width of one unjoined flower by the number of flowers.
Finishing the Scalloped Flower Edges
One distinguishing feature of this design is its irregular floral perimeter. Instead of adding a conventional rectangular border, the outer petals remain visible.
For a similar finish, arrange the last row so that the outer petals project beyond the adjacent row. This creates a repeated scalloped silhouette.
After all motifs are joined, inspect the edge for loose yarn tails and unsupported connections.
If the outer petals curl, lightly block the edge. Pin each petal into a consistent rounded shape and allow the fabric to dry completely.
An optional round of single crochet can reinforce selected exposed edges, but it will change the appearance and may reduce the softness of the scalloped outline.
7 Technical Tips for a Better Crochet Flower Blanket
- Mark the first stitch: Place a stitch marker in the first sc of the center round. Losing the starting point can shift the six chain spaces and produce uneven petals.
- Control the center opening: Keep the central hole approximately 4–6 mm wide. Pulling the magic ring completely closed removes the visible opening, while leaving it too loose can weaken the center.
- Check petal symmetry: Each simplified flower should have six petals with seven stitches per petal. An extra double crochet can make one petal wider than the others.
- Maintain yarn tension: Use the same hook and yarn weight for both colors. A difference of even 5 mm between finished motif widths can cause noticeable distortion across a large blanket.
- Pin before joining: Align the petal tips before sewing adjacent flowers. Joining unaligned petals can create diagonal pulling and irregular gaps.
- Secure joining tails: Weave each yarn tail through several neighboring stitches and reverse direction before trimming. Short, unsecured tails can work loose during washing.
- Block a sample first: Measure the joined sample before and after blocking. Significant dimensional changes affect the final flower count and the blanket’s fit on the bed.
Washing and Caring for the Finished Blanket
Care instructions depend on the yarn fiber. Follow the yarn manufacturer’s washing and drying recommendations rather than relying on a general crochet care method.
For washable acrylic yarn, use the temperature and machine settings listed on the label. Delicate wool or blended fibers may require hand washing and flat drying.
A large floral blanket becomes heavier when wet, especially if the yarn absorbs substantial water. Support the fabric during lifting to prevent the joined petal tips from stretching.
When drying flat, arrange the blanket into its intended shape without pulling individual flowers beyond their natural dimensions.
Inspect the joins after washing. Repair any loose connections before using the blanket again.
Common Crochet Flower Blanket Problems
Why Are the Flowers Curling?
Curling may result from tight chain spaces, a hook that is too small, or excessive stitch height. Compare the motif against a flat sample and adjust the hook size or petal construction as needed.
Why Are the Flowers Different Sizes?
Changes in yarn tension, hook size, or fiber thickness can produce inconsistent dimensions. Measure several flowers from each color group and compare their average widths.
Why Are the Joins Pulling Apart?
Petal-tip joins carry tension when the blanket is moved or stretched. Reinforce weak connections with additional sewing stitches, avoiding bulky knots.
Can This Pattern Be Made With Chunky Yarn?
Yes, but the finished flowers will be larger and heavier. Make a new sample and calculate the yarn requirement from its actual weight and joined dimensions.
Can I Use Three or More Colors?
Yes. Assign each color to a repeating row or a planned motif sequence. Keep the yarn weight and gauge consistent so that the different color groups join evenly.
Conclusion
This crochet flower blanket pattern uses six-petal motifs to build a larger floral fabric in alternating gray and off-white yarn. Its modular construction allows the dimensions to be adjusted by changing the number of flowers, while the exposed petals form a decorative scalloped edge.
Begin by making six sample motifs and joining them into a test section. Measure the resulting fabric, check the joining strength, and calculate the yarn quantity before producing the remaining flowers.
Save the completed blanket on Pinterest or share a photograph on Instagram using #CrochetFlowerBlanket.
Would you arrange the gray and white flowers in staggered diagonal rows or in a regular alternating pattern?
