The bedspread is planned as a field of five-petal crochet flowers, with open ivory centers, rounded petals in sky and pale blue, and ivory joins. Its finished dimensions depend on the bed, the chosen motif, and the spacing between flowers, so the project begins with measuring and a blocked sample rather than a preset stitch count.
The same floral approach can be used for two coordinating cushion covers. Because the reference does not provide verified stitch counts or a tested motif pattern, this is a photo-inspired project guide, not a complete stitch-by-stitch pattern. Choose a tested flower motif pattern that matches the look, then use the planning and construction steps below to size, join, and finish the set.
Pattern at a Glance
- Skill level: Best for crocheters comfortable following a separate motif pattern and joining motifs. Planning a large bedspread also calls for patience and careful measuring.
- Terminology: US crochet terminology.
- Construction: Individual flower motifs are made, blocked, arranged, and joined into a bedspread panel. Two matching flower panels are made for cushion covers.
- Finished size: Determined by your bed measurements, desired side drop, motif size, and layout.
- Yarn: Smooth cotton or cotton-blend yarn in one consistent weight. Sky blue and pale blue are suggested for petals; ivory is suggested for centers and joins.
- Hook: Choose a hook matched to the yarn label and the drape you want. The source does not specify a hook size.
- Motifs: Five-petal flowers with open ivory centers and rounded colored petals. Exact stitch counts are not confirmed.
- Joining: A tested ivory joining method, sampled first to check that the fabric lies flat.
- Gauge: No gauge is provided. Use a blocked sample motif to plan the layout and estimate yarn.
Materials
- Smooth cotton or cotton-blend yarn in one consistent weight:
- Sky blue and pale blue for the petals
- Ivory for the centers and joins
- Crochet hook matched to the yarn label and desired drape
- Yarn needle for weaving in ends and finishing
- Scissors
- Stitch markers for marking layout points or keeping track of sections
- Measuring tape
- Blocking mat and pins
- Two cushion inserts
- Optional fabric backing for the cushion covers
No exact yarn quantity is supplied. Calculate it from a finished sample motif and your bed measurements. The sample method below helps estimate the separate color requirements, including yarn for joining and finishing.
Yarn and Color Notes
Use the same yarn weight and a consistent yarn construction throughout the bedspread. A noticeable difference in thickness or fiber behavior between colors can make the motifs vary in size, even when you follow the same stitch pattern. Cotton and cotton-blend yarns are suggested because they offer a smooth stitch definition that shows the flower shape clearly.
The suggested palette uses sky blue and pale blue for the petals, with ivory centers and joins. Decide how you want to distribute the two blues before making the full set. For example, you might use one blue for each flower, alternate the colors across the bed, or use both blues within each flower if your chosen motif pattern supports that color arrangement. Keep a written color plan so the layout looks intentional.
A smooth, solid yarn makes the petal edges and ivory joining lines easy to see. Highly textured or fuzzy yarn may obscure the motif details and can make accurate measuring more difficult. If you substitute another fiber, make a blocked sample first; different fibers can relax or stretch differently.
Finished Measurements and Sizing Plan
The bedspread size is not predetermined. Measure the bed top and decide how far you want the fabric to drop over the sides. Measure the cushion inserts as well, allowing for the chosen cover construction and the amount of ease you want.
To plan the bedspread:
- Measure the width and length of the bed top.
- Decide on the desired side drop. Include that drop in the overall width and length you want the bedspread to cover.
- Measure the blocked width of a sample motif.
- Arrange sample motifs to see how their flower-shaped edges meet and how much space the ivory joins add.
- Use the arrangement to determine the number of motifs needed and the approximate finished dimensions.
Because the outer edge follows the flower shapes, the bedspread’s edge will not be a straight rectangle unless you add a separate treatment. The source calls for retaining the flower-shaped outer edge, so plan the layout with that outline in mind.
Gauge
No gauge is specified for this project. Instead, make and block a sample motif in the chosen yarn and hook, then measure it. The sample is the practical gauge reference for estimating the finished bedspread and yarn use.
Measure the motif after it has been finished and blocked, since that is the size it will have in the completed project. If your motifs are larger than the sample used to plan the layout, the finished bedspread will cover more area and require fewer motifs, but each motif may use more yarn. If they are smaller, you will need more motifs for the same coverage.
For a bedspread, exact gauge is less important than consistency. The main goal is to keep the motifs close to the same size and to check that the join does not cause the fabric to pull, ripple, or buckle.
Abbreviations
The project guide does not specify individual stitches, so no stitch abbreviations are defined here. Follow the abbreviations and stitch instructions in the tested five-petal flower motif pattern you choose. If its terminology differs from US terms, confirm the conversion before crocheting the full set.
Important Pattern Notes
- This is a photo-inspired project guide, not a tested stitch-by-stitch pattern.
- The exact stitch counts for the flower cannot be confirmed from the reference.
- Select a tested five-petal flower motif with an open ivory center and rounded colored petals.
- Make and block a sample before estimating the full quantity.
- Keep yarn weight and tension consistent across all motifs.
- Test the ivory joining method on sample motifs before joining the bedspread.
- Retain the flower-shaped outer edge rather than assuming the project has a straight border.
- Make two matching flower panels for the cushion inserts and attach them to suitable backings with removable openings.
- Follow the yarn label for care instructions.
Special Techniques
Sampling and blocking
A sample motif lets you check the flower’s size, appearance, and drape before committing to a large quantity of yarn. Finish and block it as you intend to finish the full project. This is important because blocking can change the motif’s shape and dimensions.
Joining motifs
The source calls for a tested ivory joining method but does not name a particular stitch or technique. Choose a method compatible with your selected motif pattern, then try it with a few samples. The join should hold the flowers securely while allowing the fabric to lie flat.
Estimating yarn by weight
Weigh the finished sample and record how much yarn it uses in each color. If possible, weigh the yarn used for the centers and petals separately. Use those figures alongside the number of motifs in your planned layout to estimate the color quantities. Allow extra for joins and finishing; the source does not specify a percentage or exact yardage.
Understanding the Construction
The bedspread is made from individual flowers rather than one continuous piece. First, measure the bed and make a sample flower. Then use the blocked sample to plan the arrangement and estimate the number of motifs. Once the layout is settled, make matching flowers, weave in their ends, and connect them with the chosen ivory method.
The flowers remain visible along the outside edge. The source does not call for a separate rectangular border, so the motif outlines form the perimeter. The cushion covers use the same floral idea on a smaller scale: make two matching flower panels sized for the inserts, then attach them to suitable backings with openings that allow the inserts to be removed.
Full Project Instructions
1. Measure the bed and cushions
Measure the bed top and decide on the side drop you want. Use those measurements to establish the overall area the bedspread should cover. Measure both cushion inserts, too, so you can plan panels that fit them.
Record the measurements before starting. A simple sketch of the bedspread’s intended shape and the cushion panels can help you keep the project organized, especially if you plan to alternate the two blue colors.
Checkpoint: You should have target coverage measurements for the bedspread and dimensions for both cushion inserts. No fixed finished size is prescribed.
2. Select a tested five-petal flower motif
Choose a tested crochet motif pattern with an open ivory center and rounded petals resembling the reference. The exact stitch counts cannot be confirmed from the photo, so use the counts and construction supplied by the selected motif pattern rather than trying to infer them.
Check that the chosen motif can be worked in the suggested colors and that its finished shape is suitable for joining. Read the pattern through before beginning so you understand its round structure and where color changes occur.
3. Crochet, finish, and measure one sample
Make one flower using your intended yarn weight, hook, and color arrangement. Finish it according to the motif pattern and block it as you plan to block the full project.
After the sample is fully dry, measure its width. Weigh it and record the yarn used by color. If the flower changes shape or size during blocking, use the blocked measurements for the layout plan.
Checkpoint: The sample should be fully dry, hold its intended flower shape, and provide a reliable size and color-by-color yarn estimate.
4. Plan the layout and estimate yarn
Arrange sample motifs on a flat surface to determine the spacing and overall layout. Consider how the flower edges will meet and how the ivory joins will appear. Adjust the layout until it fits the bed coverage you planned while retaining the flower-shaped outer edge.
Use the blocked sample measurements and the chosen arrangement to determine how many flowers are needed. Estimate yarn from the recorded sample use, taking into account the quantities of each color and the number of motifs. Add allowance for ivory joins and finishing; the precise extra amount depends on the joining method and layout.
Checkpoint: Before making the full set, confirm the approximate motif count, the color distribution, and the outline of the finished bedspread.
5. Make the matching flower motifs
Crochet the planned flowers using the selected motif pattern. Keep the yarn weight, hook, and tension consistent so the pieces remain close in size. Follow the same color plan for each flower or for each planned color group.
Weave in ends as you go or after completing a manageable batch. Securing ends before joining reduces loose tails during assembly. Keep finished motifs flat and sorted by color or position in the layout.
6. Lay out and join the bedspread
Lay all the flowers out in the intended arrangement. Check the overall dimensions and color placement before joining. Connect the motifs using the tested ivory joining method. Work steadily and avoid pulling the joins tight; overly tight joins can draw the fabric inward, while loose or uneven joins can leave gaps.
Pause during assembly to spread the work flat and check that the flowers still lie smoothly. If the fabric begins to cup or ripple, stop and review the join tension before continuing.
7. Keep the flower-shaped outer edge
As you complete the joins, retain the flower-shaped outline at the outside edge. Secure every join and inspect the perimeter for loose connections. The source does not specify a separate border, so do not add one unless you deliberately choose to adapt the project.
Checkpoint: The joined panel should lie as flat as possible, with secure joins and the intended floral outline intact.
8. Make the cushion panels
Use the same flower motif, yarn, and color approach to make two matching panels sized for the cushion inserts. Arrange the flowers to suit each insert and check the panel dimensions before attaching the backing.
Attach each panel to a suitable backing with a removable opening so the insert can be taken out. The source does not specify a particular closure or backing construction. Choose a practical opening that suits the backing material and makes it possible to remove the insert for care.
9. Block and care for the finished set
Block the bedspread and cushion panels to the planned dimensions, using the yarn’s care requirements as your guide. Shape the flower edges and smooth the joined areas without stretching the fabric beyond its intended size.
Care for the finished bedspread and cushion covers according to the yarn label. If you have mixed materials or added fabric backing, follow the care needs of the least washable component.
Assembly and Joining
Before joining the full bedspread, work a small test with the chosen joining method and two or more motifs. Arrange the pieces as they will sit in the project and check the resulting fabric on a flat surface. This test helps reveal whether the join is too tight, too loose, or unsuitable for the flower edges.
For the full assembly:
- Place the blocked motifs in the planned order and orientation.
- Check the blue color placement and outer flower-shaped edge.
- Join motifs using the tested ivory method.
- Keep the tension even, without drawing the edges together too tightly.
- Spread the growing panel flat regularly to check for distortion.
- Secure and weave in the remaining joining ends.
The source does not specify right-side or wrong-side orientation, because that depends on the chosen motif and joining method. Follow the motif pattern’s guidance and keep the visible sides consistent across the bedspread.
For cushion covers, attach each flower panel to its backing while keeping the removable opening accessible. Check that the insert can be removed and replaced without straining the floral panel or the attachment.
Finishing and Blocking
Weave in all remaining yarn ends securely, taking care not to distort the flower shapes. Inspect the ivory joins and the flower-shaped outer edge; reinforce any loose areas using the same joining method.
Block the completed bedspread to the planned dimensions. Work in sections if that makes the large fabric easier to handle, and pin the floral perimeter into the shape you want to retain. Avoid forcing the fabric into a straight outline if the design is intended to keep its flower-shaped edge.
Block the cushion panels to their intended fit before attaching or completing the backing. Follow the yarn label for washing and drying. If the yarn is cotton or a cotton blend, do not assume the finished item can be treated like a different fiber; check its specific care instructions.
How to Resize the Project
This motif-based construction is resized by changing the layout, not by changing stitch counts within the flower.
- For a wider or longer bedspread: Add motifs to the arrangement where needed, then recheck the overall outline and the amount of side drop.
- For a smaller bedspread: Use fewer motifs, keeping the remaining arrangement balanced and the flower-shaped edge intentional.
- For a different motif size: Make and block a new sample, then plan the layout again. Do not rely on unblocked measurements.
- For cushion covers: Adjust the number and arrangement of flowers to fit the measured inserts. Check the panel against the insert before attaching the backing.
Because no motif dimensions or yarn amounts are specified, exact motif counts cannot be calculated in advance. Re-measure whenever you change the yarn, hook, or motif pattern.
Useful Variations
- Swap the blue distribution: Use sky blue and pale blue in alternating flowers or assign each blue to a different area of the bedspread.
- Use one petal color: Keep the ivory centers and joins, but work every flower’s petals in a single blue for a more uniform field.
- Change the palette: Keep the same motif and construction while selecting other smooth yarn colors that coordinate with your room.
- Make cushion covers only: Use the same flower arrangement on two panels sized for the inserts, without making the bedspread.
- Create a smaller floral panel: Use the motif layout for a small decorative piece, adjusting the number of flowers to suit the intended use.
These variations preserve the motif-based construction. Any change in yarn or color plan should be tested in a blocked sample first.
Troubleshooting
Why don’t my motifs match in size?
Check that you are using the same yarn weight, hook, and motif instructions for every flower. Differences in tension can accumulate across a large bedspread. Measure motifs after blocking, and set aside any noticeably different pieces to adjust before joining.
Why does the joined fabric ripple or cup?
The joining tension may be uneven or too tight. Stop and lay the piece flat to locate the distortion. Test the joining method again on sample motifs, then adjust your tension so the joins connect the flowers without pulling their edges inward.
Why does the bedspread not fit my planned measurements?
The layout estimate may have been based on an unblocked motif, or the join spacing may differ from the sample. Measure the blocked sample and a joined sample section, then revise the arrangement before completing the full panel. The motif count should be based on the actual finished pieces and joins.
Why does the outer edge look uneven?
The flower-shaped outline depends on the arrangement and the way the edge motifs meet. Recheck the placement of the outside flowers before finalizing joins. Do not pull the perimeter into a straight line if you want to retain the floral edge.
Why is my yarn estimate too low?
The estimate may not have included the yarn used for joining and finishing, or the finished motifs may use more yarn than the original sample. Weigh the sample by color and base the estimate on the number of motifs in the final layout. Keep extra yarn in the same colors available for completion.
Why do the cushion covers fit poorly?
Compare the blocked panels with the cushion inserts before attaching the backing. The source does not prescribe a fixed amount of ease, so test the fit directly. Make any layout adjustments before closing or finishing the removable opening.
Why are the color changes inconsistent?
Follow the chosen motif pattern’s color-change instructions and maintain the same color order across matching flowers. Keep a written note of which blue is used where, especially if the two cushion panels should match the bedspread.
Why does blocking change the motif shape?
Blocking can relax or reshape crochet fabric, and different yarns respond differently. Use the blocked sample—not the fresh-off-the-hook motif—to plan dimensions. Block the full project according to the yarn label and avoid stretching the flowers beyond the shape you intend.
Frequently Asked Questions
Is this a complete stitch-by-stitch flower pattern?
No. The guide does not provide stitch counts for the flower. Choose a tested five-petal motif pattern with an open ivory center and rounded petals, and follow that pattern’s stitch instructions.
Can I use a different yarn weight?
You can, but the motif size and yarn use will change. Keep the yarn weight consistent throughout the project, make a new sample, and base the layout and quantity estimate on that blocked sample.
Can I use cotton?
Yes. Smooth cotton or cotton-blend yarn is suggested. Check the yarn label for care instructions, and make a blocked sample to see how the yarn behaves in the motif and joins.
How much yarn will I need?
The source gives no exact yardage. Crochet and block a sample, measure it, and weigh the yarn used in each color. Estimate from the number of motifs in your layout and allow extra for joins and finishing.
How do I make the bedspread larger?
Add motifs to the layout in the places needed to increase coverage. Recheck the dimensions, color balance, and flower-shaped outer edge before joining the full project.
Do I need a special hook?
No special hook size is specified. Choose one that suits the yarn label and gives the drape you want, then use it consistently for the sample and the full set.
Should I add a straight border?
The project guide calls for retaining the flower-shaped outer edge and does not specify a separate border. You can leave the perimeter as the flowers create it; adding a border would be an adaptation rather than a supplied instruction.
How should I care for the finished bedspread?
Follow the yarn label. If the cushion covers include fabric backing, take that material into account as well, since it may have different care requirements from the crochet.
Final Construction Recap
Measure the bed and cushion inserts, then choose a tested five-petal flower pattern and make a blocked sample. Use the sample’s size and yarn weight to plan the layout and estimate quantities. Make consistent motifs, join them in ivory while preserving the flower-shaped edge, create matching cushion panels with removable backings, and block and care for the set according to the yarn label.
