Introduction
A duck beak has to sit wide and low, or the whole face reads like a chick. This flower duck amigurumi crochet pattern uses chenille yarn, a 3.5 mm hook, 8 mm safety eyes, and a 30-stitch head plateau for a small plush duck about 14–18 cm tall. Work it at easy-to-intermediate level for a market-table sample, nursery shelf piece, or spring pattern post.
The Design: What Makes Flower Duck Different
The flower hat is not a separate bonnet; it is a flat petal crown stitched around a raised yellow center. That keeps the top light so the head does not tilt backward. You need a low, oval beak because a duck face loses its profile when the beak is stitched as a tiny triangle. The maker then reads the toy from the front: black eyes, blush patches, beak, flower rim. This crochet duck with flower hat also uses short rounded arms instead of wings, which suits a seated plush duck crochet pattern with visible feet. The common mistake is overstuffing the head before eye placement. Once the washers are locked, the face cannot be narrowed, and the cheeks spread too far outward.
Project Info at a Glance
| Skill Level | Time | Finished Size | Hook | Best For |
|---|---|---|---|---|
| Easy to intermediate | 1–2 hours | 14–18 cm | 3.5 mm | Spring plush, market sample, shelf toy |
The time estimate follows comparable spring flower duck listings, while the size range is based on comparable 14–18 cm flower duck results and chenille maker data.
Materials and Tools
Yarn
- Yellow — plush / chenille bulky yarn — 45–55 g — suggested brands: James C. Brett Flutterby Chunky, King Cole Yummy, Rico Design Ricorumi Nilli Nilli, or similar soft chenille
- Pink — plush / chenille bulky yarn — 12–15 g — flower petals and cheek patches
- Orange — plush / chenille bulky yarn — 5–8 g — beak and feet
- Green — plush / chenille bulky yarn — 2–4 g — single leaf
Tools
- Hook 3.5 mm
- 8 mm safety eyes
- Polyester stuffing
- Yarn needle
- Stitch markers
- Scissors
- Pins for petal placement
Abbreviations
MR = magic ring; sc = single crochet; inc = increase; dec = decrease; sl st = slip stitch; ch = chain; BLO = back loop only; st = stitch; R = round or row.
Use invisible dec by inserting the hook through the front loops of the next two stitches before completing one sc; it reduces gaps on the head and body closures.
Pattern — Step by Step
Continuous spiral unless noted. Ovals, cheeks, petals, leaf, and beak are worked flat or around a chain as written.
Head
Yarn: yellow
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (sc, inc) ×6 (18)
R4: (2 sc, inc) ×6 (24)
R5: (3 sc, inc) ×6 (30)
R6: sc around (30)
R7: sc around (30)
R8: sc around (30)
R9: sc around (30)
R10: sc around (30)
R11: sc around (30)
R12: (3 sc, dec) ×6 (24)
R13: (2 sc, dec) ×6 (18)
R14: (sc, dec) ×6 (12)
R15: dec ×6 (6)
Stuff firmly before R14. Install eyes before closing if using safety washers.
Fasten off. Leave 20 cm tail and close the final opening.
Body
Yarn: yellow
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (sc, inc) ×6 (18)
R4: (2 sc, inc) ×6 (24)
R5: (3 sc, inc) ×6 (30)
R6: sc around (30)
R7: sc around (30)
R8: sc around (30)
R9: sc around (30)
R10: sc around (30)
R11: (3 sc, dec) ×6 (24)
R12: (2 sc, dec) ×6 (18)
R13: (sc, dec) ×6 (12)
R14: dec ×6 (6)
Stuff firmly through the base before the last decrease round.
Fasten off. Leave 25 cm tail if sewing the body closed through the neck line.
Arms / Small Wings
Yarn: yellow — Make 2
R1: 6 sc in MR (6)
R2: sc around (6)
R3: sc around (6)
R4: sc around (6)
Slightly stuff. Fold the opening flat and stitch across both layers if a flatter side profile is needed.
Fasten off. Leave 15 cm tail for sewing.
Back Legs / Feet
Yarn: orange — Make 2
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (sc, inc) ×6 (18)
R4: (2 sc, inc) ×6 (24)
R5: (2 sc, dec) ×6 (18)
Stuff lightly. A firm foot can push the duck backward, so keep the top edge flexible.
Fasten off. Leave 18 cm tail for sewing.
Flower Petals
Yarn: pink — Make 6
Ch 6.
R1: sc in 2nd ch from hook, 3 sc, 3 sc in last ch, continue on the other side of the chain, 3 sc, sl st (10)
This forms a small oval petal. Do not stuff.
Fasten off. Leave 15 cm tail on each petal.
Yellow Flower Center
Yarn: yellow — Make 1
R1: 6 sc in MR (6)
R2: inc ×6 (12)
R3: (sc, inc) ×6 (18)
Keep the center shallow, not domed too high, so it covers the petal bases cleanly.
Fasten off. Leave 20 cm tail for sewing to the top of the head.
Green Leaf
Yarn: green — Make 1
Ch 7.
R1: sc in 2nd ch from hook, 4 sc, 3 sc in last ch, continue on the other side of the chain, 4 sc, sl st (12)
Pin behind one petal before sewing the flower center.
Fasten off. Leave 15 cm tail for sewing.
Beak
Yarn: orange
Ch 7.
R1: sc in 2nd ch from hook, 4 sc, 3 sc in last ch, continue on the other side of the chain, 4 sc, sl st (12)
The beak is an oval, not a cone. Sew it low between R8 and R9 of the head.
Fasten off. Leave 18 cm tail.
Cheek Patches
Yarn: pink — Make 2
R1: 6 sc in MR (6)
Sl st to close.
Pull the center closed tightly so the patch stays flat under the eye.
Fasten off. Leave 12 cm tail for sewing.
Eyes
Part: 8 mm safety eyes
Install 2 black safety eyes between R7 and R8 of the head, spaced 7 stitches apart.
Check beak placement before pressing on the washers. Once attached, safety eyes cannot be moved without cutting the head open.
Assembly
- Close the head and body openings, then align the head directly over the body center.
- Sew the head to the body with small ladder stitches, keeping the neck seam level.
- Insert or confirm the eyes between R7 and R8, spaced 7 stitches apart.
- Sew the orange beak between R8 and R9, centered between the eyes.
- Sew the pink cheek patches under the eyes and slightly outside the beak corners.
- Attach the arms to the body sides between R6 and R7 of the body.
- Sew the orange feet to the lower front of the body so the duck sits without tipping.
- Arrange six pink petals around the top of the head, then pin them before sewing.
- Place the green leaf behind one petal and sew the yellow flower center over the petal bases.
- Weave all tails through stuffed sections, trim only after tension is checked, and brush the chenille surface lightly by hand.
The finished plush should sit upright with the beak centered below the eye line.
7 Technical Tips
- Stitch marker drift: If the marker moves more than 1 stitch after R5, the face seam can spiral across the front. Move the marker at the end of each round before working the R6–R11 head plateau.
- Stuffing firmness: An underfilled body collapses at the neck seam. Fill the body until the side wall springs back, but leave the top 5 mm soft for sewing.
- Invisible decrease gaps: A standard decrease can leave dark holes in chenille on R13–R15. Use front-loop invisible decreases and keep each pulled loop about 3 mm high.
- Eye placement timing: Eyes placed after the head is closed force the washers through stuffing and distort the beak line. Install them between R7 and R8 with exactly 7 stitches between the posts.
- Velvet tension: Loose velvet tension can widen the 30-stitch head by 1 cm or more. Keep the 3.5 mm hook and repeat the count at the end of every plateau round.
- Petal pinning: Unpinned petals usually crowd to one side of the flower center. Pin six petals at even clock positions before the yellow center is sewn down.
- Tail weaving: Short chenille tails can pull out during handling. Leave at least 15 cm on sewn pieces and weave across two stitch columns before trimming.
Conclusion
Block the flower hat before you judge the silhouette, because the petals decide whether the duck reads as a duck or a chick in costume. Next, crochet one sample in scrap chenille and write down its exact height, eye spacing, and yarn use beside the pattern. Save the finished toy photos for Pinterest with a close crop of the beak and flower crown, then post an Instagram reel showing the six-petal placement step. Tag the post with #FlowerDuckAmigurumi. For the next flower duck amigurumi crochet pattern test, would you keep the orange oval beak flat or add one extra round for more bill depth?
