Strawberry Cow Amigurumi Crochet Pattern

A cow only reads as a cow in amigurumi when the muzzle projects farther than the forehead. This strawberry cow amigurumi crochet pattern uses plush yarn, a rounded snout, and a compact seated body to produce that profile at a small display size. The project finishes at about 16 cm tall, works best for intermediate makers, and suits gift builds, market stock, or themed spring decor.

The Design: What Makes This Strawberry Cow Different

The structure depends on proportion first. The head is oversized, but not spherical all the way through. It widens early, holds a short plateau, then closes fast so the snout and safety eyes stay dominant from the front view. That is what keeps the cow face soft instead of generic.

The seated body is shorter than the head height. That matters. A taller torso would push the piece toward a standing farm-animal silhouette, while this version needs a shelf-sitter shape with visible front legs and tucked back legs. The result is stable on a flat surface and cleaner in photos.

The strawberry details also need restraint. One topper on the head, one pendant at the neck, and flat pink body spots are enough. Add too many appliqués and the form gets visually noisy. A common mistake with strawberry cow amigurumi is placing the ears too low and too wide, which makes the horns disappear from the front view and flattens the face.

Project Info at a Glance

Skill LevelTimeFinished SizeHookBest For
Intermediate5–7 hoursApprox. 16 cm / 6.3 in seated4.5 mmDisplay plush, gift make, market table

Materials and Tools

Yarn

  • White — plush/velvet weight — approx. 65 g — chenille-style yarn
  • Light pink — plush/velvet weight — approx. 35 g — hooves, muzzle, ears, cheeks, spots
  • Pink — plush/velvet weight — approx. 20 g — strawberries and collar
  • Green — plush/velvet weight — approx. 8 g — leaves and calyx
  • Beige — plush/velvet weight — approx. 5 g — horns
  • Yellow — small amount — daisy center
  • Black — small amount — nostrils and brows

Tools

  • 4.5 mm hook
  • 12 mm safety eyes
  • Polyester stuffing
  • Tapestry needle
  • Stitch markers
  • Scissors

Abbreviations

  • MR = magic ring
  • sc = single crochet
  • inc = increase
  • dec = invisible decrease
  • sl st = slip stitch
  • ch = chain
  • BLO = back loop only
  • FO = fasten off

Use invisible decrease for all shaping rounds so the plush surface stays compact and the pink-to-white transitions do not gap.

Pattern — Step by Step

Work in a continuous spiral unless stated otherwise.

Head (Make 1)

Yarn: white

  1. R1: 6 sc in MR (6)
  2. R2: inc x6 (12)
  3. R3: (sc, inc) x6 (18)
  4. R4: (2 sc, inc) x6 (24)
  5. R5: (3 sc, inc) x6 (30)
  6. R6: (4 sc, inc) x6 (36)
  7. R7-11: sc around (36)
  8. R12: (4 sc, dec) x6 (30)
  9. R13: sc around (30)
  10. R14: (3 sc, dec) x6 (24)
  11. R15: (2 sc, dec) x6 (18)
  12. Insert safety eyes between R8 and R9, about 10 stitches apart. Sew the snout centered below the eyes before fully closing.
  13. R16: (sc, dec) x6 (12)
  14. Stuff firmly, especially the lower front of the face.
  15. R17: dec x6 (6)

Fasten off. Close the opening.

Body (Make 1)

Yarn: white

  1. R1: 6 sc in MR (6)
  2. R2: inc x6 (12)
  3. R3: (sc, inc) x6 (18)
  4. R4: (2 sc, inc) x6 (24)
  5. R5: (3 sc, inc) x6 (30)
  6. R6-8: sc around (30)
  7. R9: (3 sc, dec) x6 (24)
  8. R10: sc around (24)
  9. R11: (2 sc, dec) x6 (18)
  10. R12: sc around (18)
  11. R13: (sc, dec) x6 (12)

Stuff the lower half more densely than the neck opening. Fasten off. Leave a 20 cm tail for sewing.

Front Legs (Make 2)

Yarn: start light pink, then change to white

  1. R1: 6 sc in MR (6)
  2. R2: inc x6 (12)
  3. R3: sc around (12)
  4. Change to white.
  5. R4: (2 sc, dec) x3 (9)
  6. R5-10: sc around (9)

Stuff the hoof section only. Flatten the top. Fasten off. Leave a sewing tail.

Back Legs (Make 2)

Yarn: start light pink, then change to white

  1. R1: 6 sc in MR (6)
  2. R2: inc x6 (12)
  3. R3-4: sc around (12)
  4. Change to white.
  5. R5: (2 sc, dec) x3 (9)
  6. R6-8: sc around (9)

Stuff lightly. Flatten the top. Fasten off. Leave a sewing tail.

Snout (Make 1)

Yarn: light pink

  1. Ch 6.
  2. R1: Starting in 2nd ch from hook, 4 sc, 3 sc in last ch, working on opposite side 3 sc, inc in last st (12)
  3. R2: inc, 3 sc, inc x3, 3 sc, inc x2 (18)
  4. R3: sc around (18)

Fasten off. Leave a long tail. Embroider two nostrils after sewing.

Outer Ears (Make 2)

Yarn: white

  1. R1: 6 sc in MR (6)
  2. R2: (sc, inc) x3 (9)
  3. R3: (2 sc, inc) x3 (12)
  4. R4: (3 sc, inc) x3 (15)
  5. R5-6: sc around (15)

Do not stuff. Flatten lightly. Fasten off with a long tail.

Inner Ear Inserts (Make 2)

Yarn: light pink

  1. R1: 6 sc in MR (6)
  2. R2: (sc, inc) x3 (9)
  3. R3: (2 sc, inc) x3 (12)
  4. R4: sc around (12)

Fasten off. Sew each insert onto an outer ear, keeping a visible white border.

Horns (Make 2)

Yarn: beige

  1. R1: 4 sc in MR (4)
  2. R2: (sc, inc) x2 (6)
  3. R3-5: sc around (6)

Stuff very lightly. Fasten off. Leave a sewing tail.

Cheek Patches (Make 2)

Yarn: light pink

  1. R1: 6 sc in MR (6)
  2. R2: inc x6 (12)

Slip stitch to finish. Fasten off. Keep these flat.

Head Spot (Make 1)

Yarn: light pink

  1. R1: 6 sc in MR (6)
  2. R2: inc x6 (12)
  3. R3: (sc, inc) x6 (18)

Slip stitch to finish. Fasten off. Keep flat.

Body Spots (Make 3)

Yarn: light pink

Medium spots, make 2:

  1. R1: 6 sc in MR (6)
  2. R2: inc x6 (12)
  3. R3: (sc, inc) x6 (18)

Small spot, make 1:

  1. R1: 6 sc in MR (6)
  2. R2: inc x6 (12)

Slip stitch to finish. Fasten off.

Tail (Make 1)

Yarn: white with light pink tip optional

  1. Ch 8.
  2. Starting in 2nd ch from hook, sl st in next 7 stitches.

For a pom tail tip, add 3 sc into the final chain before fastening off, or sew on a tiny 6-stitch nub. Leave a tail for sewing.

Head Strawberry (Make 1)

Yarn: pink

  1. R1: 6 sc in MR (6)
  2. R2: inc x6 (12)
  3. R3: (sc, inc) x6 (18)
  4. R4: sc around (18)
  5. R5: (sc, dec) x6 (12)
  6. R6: sc around (12)
  7. Stuff lightly.
  8. R7: dec x6 (6)

Fasten off. Embroider small seed dashes in cream or yellow if desired.

Head Strawberry Calyx (Make 1)

Yarn: green

  1. In MR: (ch 3, sl st in 2nd ch from hook, sl st in next ch, sl st back into MR) x5

Pull ring tight. Fasten off. Sew to the top of the strawberry.

Pendant Strawberry (Make 1)

Yarn: pink

  1. R1: 6 sc in MR (6)
  2. R2: inc x6 (12)
  3. R3: (sc, inc) x6 (18)
  4. R4: sc around (18)
  5. R5: (sc, dec) x6 (12)
  6. R6: sc around (12)
  7. Stuff lightly.
  8. R7: dec x6 (6)

Fasten off. Add a green calyx the same way as the head strawberry. Sew seeds if wanted.

Ruffle Collar (Make 1)

Yarn: pink

  1. Ch 24 and join without twisting.
  2. R1: 24 sc around (24)
  3. R2: 2 hdc in each stitch around (48)

Fasten off. Thread the pendant strawberry to the front center before attaching or sewing the collar closed at the neck.

Daisy Flower (Make 1)

Yarn: yellow center, white petals

  1. With yellow, make 6 sc in MR (6). Slip stitch and fasten off.
  2. Join white to any stitch.
  3. In each stitch: ch 4, sl st in 2nd ch from hook, sc in next ch, sl st in next ch, sl st in next base stitch.
  4. Repeat around for 6 petals.

Fasten off. Sew beside the head strawberry.

Assembly

  1. Sew the head to the body with the neck opening centered and slightly tilted forward.
  2. Sew the snout to the lower front of the head, spanning roughly from R9 to R13.
  3. Attach the safety eyes first if not already inserted, then sew on the cheek patches slightly below and outward from the eyes.
  4. Embroider nostrils on the snout and short brows above the eyes.
  5. Sew the horns to the top of the head, leaving enough space between them for the strawberry topper.
  6. Sew the ears slightly below horn level and angle them outward.
  7. Attach the head spot and body spots where they stay visible from the front and three-quarter views.
  8. Sew the front legs close together at the lower front of the body and the back legs to the sides so the toy sits flat.
  9. Sew the tail to the back center, low on the body.
  10. Attach the ruffle collar, sew the pendant strawberry to the front center, then fix the head strawberry and daisy on top of the head.

The finished piece should sit upright without hand support.

7 Technical Tips

  • Mark the first stitch of every round. Plush yarn hides round joins fast, and one missed stitch early will shift the eye line by the time the head reaches 36 stitches.
  • Do not overstuff the snout. A hard snout pushes the safety eyes outward and makes the muzzle look square instead of oval.
  • Keep the front legs equal in length. Even a one-round mismatch shows immediately because both legs sit side by side at the front edge of the body.
  • Insert the safety eyes before the head drops below 24 stitches. After that point, plush yarn around the socket tightens and distorts the face when you force the posts through.
  • Pin the ears and horns before sewing. On this character, moving an ear even 5 mm lower makes the forehead look wider and the horn placement look accidental.
  • Stuff the body more heavily at the base than at the neck. A loose bottom creates a backward lean, while a packed neck opening makes head sewing uneven.
  • Weave all pink spot tails in a spiral path under the appliqué. Straight tail paths can print through white plush yarn and show faint lines on the outside.

Conclusion

This strawberry cow amigurumi crochet pattern works because the shaping stays disciplined: broad head, short body, forward snout, and limited surface detail. Follow the assembly order, pin the face before sewing, and keep the legs symmetrical. That sequence matters more than speed. Once finished, photograph the cow from the front and side, then post it to Pinterest and Instagram with #StrawberryCowPattern. One useful next step is to test a second version with darker pink spots for stronger contrast. Did you place the head strawberry between the horns or slightly off-center beside one horn?

Leave a Comment